HARDWARES
DOOR PULLS
Brass Arts & Crafts Pull/ Knoxville Pull
Drilled and tapped with 1/4″-20 Thread
Supplied with:
– Both 1/4″-20 Screws and #10-32 Screws
– Adapter for #10-32 Thread
– 2 Threaded Washers
– 2 Decorative Caps
– Two 2″ #10-32 Machine Screws
EMTEK HANDLE SETS
– Standard 2-1/8″ Door Prep. Door Prep 5-1/2″ Center-to-Center
– Schlage C Keyway
– Standard latch is for 2-3/8″ backset. Specify 2-3/4″ backset if required
– Handing required if Lever used on inside or if Interconnect device is specified
EMTEK KNOB & LEVERS
– Standard Door Prep and Installation
– Schlage C Keyway
– Includes Adjustable Latch (2-3/8″ and 2-3/4″ backsets) and Strike Plate
– Handing required for Leversets
MULTIPOINT LOCK TRIMS
– Can be ordered with any Tuscany Bronze Levers
– Swinging Patio Door Hardware. Set includes Plates, Handles, and Cylinder
– Multi Point Mortise Lock Box not included. Trims Only
PANIC DEVICES
TOUCH BAR EXIT DEVICES
TRANSATLANTIC DOOR CLOSERS
The DC-50 closer has a cast aluminum alloy body and is recommended for use on all commercial applications. Closers with non-hold open arms are UL listed for “A” label fire doors. Closers have full spring adjustment from sizes 2-5.
Options
BC: Backcheck HO: Hold open
SPC: Packed w/ parrallel arm, cover, and thru bolts. (Size 4 only)
The DC-CTP40 closer has a cast iron body and is recommended for use on heavy duty commercial, industrial, and institutional applications. It is tri- packed with regular, parallel, and top-jamb mounting. Closers with non-hold open arms are UL listed for “A” label fire doors. Fully compliant with opening force requirements for ADA and ANSI/BHMA standards. Closers have full spring adjustment from sizes 1-6 and are pre-adjusted to size 3.
Read More
TRANSATLANTIC PUSH/PULL PADDLE
For use with the SF-DL3200/4700 deadlatch mortise lock. Paddle is four way reversible. Handing can be reversed on cam plug by removing the C-clip and flipping the cam over and reinstalling C-clip.
Specifications SF-EPP496
-Paddle: extruded aluminum
-Housing: zinc alloy, black hard coat finish
-Operating assembly: steel mechanism
-Specify handing: RH/LH
-Paddle reversible
-Standard packing: paddle arm, operating housing, binder
posts, cam plug, self adhesive decals, and mounting hardware
-Finishes: AL, DU
License #: 192.000274 
